A Guide to Fix Netgear Orbi Firmware Update Failed Issue

For your Netgear device to work smoothly without any hassle, it is important to perform Orbi firmware update process on a regular basis. However, 4 out of 5 users get Orbi firmware update failed issue. If you are also among them, then walking through the troubleshooting steps provided in this post will surely help you get rid of “Netgear Orbi firmware update failed” issue on the fly. Thus, stick to this 5-minute read!

ALSO READ:- How to Update Orbi Firmware in a Few Simple Steps

Reasons: Orbi Firmware Update Failed

Well, there can be a number of reasons why you are getting “Netgear Orbi firmware update failed” issue. A few of them are outlined underneath:

  • Your internet connection isn’t strong
  • The connection between your Netgear Orbi and the existing modem is not stable
  • Issues from your service provider’s end
  • WiFi devices and neighboring SSIDs are interrupting the WiFi signals of your Orbi device
  • Technical glitches may also lead you to “Netgear Orbi firmware update failed” issue

Now that you are well aware of the reasons behind getting “Netgear Orbi firmware update failed” issue, follow the steps highlighted below to get the issue fixed in a flash.

Fixed: Netgear Orbi Firmware Update Failed

Here are the fixes that will surely help you get rid of “Netgear Orbi firmware update failed” issue:

Fix 1

Restart Your Orbi Device

Before you apply any advanced fix to troubleshoot “Netgear Orbi firmware update failed” issue, let us start with the simple yet important fix first. Yes, restarting the Orbi device is helpful to fix many big technical issues with it. Thus, without much delay, scroll down a little and get to know the step to restart your Orbi device.

Step1: Disconnect every device that is connected to your Netgear Orbi’s SSID.

Step2: Turn off your Orbi device. Unplug it from its respective wall outlet.

Step3: Wait for some time. Once the wait is over, plug your Orbi device back into its respective yet working wall outlet.

Step4: The power LED on the Obi device will start blinking. Wait till it gets stable.

Now, try to access Netgear Orbi login page, and perform Orbi firmware update process again. Are you able to update Orbi firmware? If not, don’t stop reading the article.

Fix 2

Check Your Internet Connection

A poor or weak internet connection can also prevent you from updating Orbi firmware. For fixing this, contact your internet service provider right away. Ensure from your ISP that you are getting a stable internet connection from his end.

Fix 3

Verify the Connection

You may also get “Netgear Orbi firmware update failed” issue if the connection between your Orbi device and the existing modem is not stable. Thus, to make the most out of your Orbi device, ensure to connect your Orbi and modem in a proper manner.

Once you are done, visit Netgear’s official site using orbilogin.com web address, and follow the instructions to update Orbi firmware.

Here’s to hope that the “Netgear Orbi firmware update failed” issue is fixed by applying the third fix. If yes, then nothing could be better than this.

Though “Netgear Orbi firmware update failed” issue is fixed, still we suggest you keep the aforementioned points into consideration. Just in case you get the same issue in the future again, you will have the fixes in hand.

To resolve Orbi firmware update failed issue, here are the important points to keep in mind:

  • Keep your Orbi device and modem away from corners and the reach of neighboring SSID.
  • Do not place your existing modem and the Orbi device inside a cabinet.
  • 90 percent of users interrupt the Orbi firmware update process in between or do not follow the Orbi firmware update process in exact order and due to that, they encounter with “Netgear Orbi firmware update failed” issue.

So, it is recommended to follow the correct Orbi firmware update instructions, without interrupting the process.

So, did you find this article helpful?

Master Henry Avatar

Leave a Reply

Your email address will not be published. Required fields are marked *