Linksys WiFi extender spot finder feature determines the WiFi signal strength between your existing router and Linksys extender. If your Linksys WiFi extender is placed too close or too far from your existing router, click on “Find better location” button and follow the on-screen prompts.
How will the Feature Work?
Linksys WiFi extender spot finder feature will only work after its configuration.
How to Configure Linksys Extender?
Setting up Linksys extender is as easy as counting 123. Follow the instructions highlighted below and know how to setup Linksys extender with ease. Keep reading!
Step 1: Power on your Linksys extender.
Step 2: Connect your Linksys extender and router using an Ethernet source.
Note: Linksys extender and router can also be connected in a wireless manner.
Step 3: Once done, get access to Linksys extender setup-xxx.
Step 4: Open a web browser on a desktop, laptop, or wireless PC.
Step 5: Enter extender.linksys.com in the address bar to get redirected to Linksys smart WiFi login page.
Step 6: Type the extender’s password into the required filed and click on Next.
Step 7: Follow the on-screen prompts.
In blink of an eye and your Linksys WiFi extender is configured already.
Now, using the Linksys WiFi extender spot finder feature, you can place it accordingly.
See, how simple is that, isn’t it?
How to Make the Most Out of Extender?
By performing Linksys extender firmware update process. After extender’s configuration, your Linksys device will go through a firmware update checkup. On the off chance if a firmware update available for your device, it will proceed with the process automatically. Just in case, it doesn’t update the firmware automatically, then update it manually.
For manual extender firmware instructions:
- Navigate to the Linksys official site
- Enter the extender’s model number
- Provide the Linksys extender login password
- Go through and apply the on-screen instructions
Once the latest firmware version on your Linksys extender gets updated, you will experience a boost in its performance like never before.
What if Linksys WiFi extender spot finder feature doesn’t work?
Linksys Extender Spot Finder Not Working
Linksys WiFi extender spot finder feature not working? No worries! Scroll down a little to get the issue fixed.
Make sure that you have successfully configured your Linksys extender. Bear in mind – improper or partial configuration of the extender leads to Linksys WiFi extender spot finder feature not working issue.
Apart from this, you have to ensure that you are connected to the correct network i.e. Linksys extender setup-xxx to make the most out of Linksys WiFi extender spot finder feature.
Ensure to use the correct router password in order to connect your extender with it.
Your existing router must be compatible with the extender in order to make the most out of Linksys WiFi extender spot finder feature. Just in case, your router does not work well with the extender, you can replace it with Linksys router. First configure it using the default Linksys router login and by following the instructions provided on its setup page. Once your Linksys router gets configured, connect it to the extender and see the difference yourself.
Note: Please take this as a suggestion only. If you find that your existing router and the Linksys extender works well together and still Linksys WiFi extender spot finder feature isn’t working, then there is no need to replace it. Rather, you can power cycle your Linksys extender and existing router.
How to Power Cycle Extender and Router?
Step 1: First things first, disconnect your Linksys extender and router.
Step 2: Secondly, get disconnected from Linksys extender setup-xxx as well.
Step 3: Thirdly, turn off your existing router and wait for a few minutes.
Step 4: Turn off your Linksys extender as well.
Step 5: A few moments later, turn on your existing router and then your Linksys extender.
Step 6: The LEDs on your device will become stable upon blinking. It may take longer time than usual.
Note: The power cycling process will surely fix many big issues with the extender apart from Linksys WiFi extender spot finder feature not working issue.
In a Nutshell
Once your devices gets power cycled successfully, try to run the Linksys WiFi extender spot finder feature again. Here’s to hope that the feature is working fine now? If you nod in yes, use it and make the most out of your devices by getting the internet range even in dead zones.
